PAKET KARAOKE B : BMB + 2 SPEAKER AUDERPRO + POWER + SUBWOOFER 15 INCH

HARGA : RP. 19.190.000

1 UNIT MIXER AMPLIFIER "BMB" DA-2700DSP
1 UNIT POWER AMPLIFIER "AUDERPRO" SA-300
2 UNIT SPEAKER "AUDERPRO" AP10-K, 10 INCH
1 UNIT SUBWOOFER AKTIF "AUDERPRO" AP115SA, 15 INCH
1 SET EQUALISER "BEHRINGER" FBQ-3102
1 UNIT MIC WIRELESS "SHURE" PGX/BETA58 (2 MIC)
1 SET STAND TRIPOT/BRACKET GANTUNG SPEAKER
1 ROLL KABEL SPEAKER "TOYO" 2 X 80 (PANJANG 35 METER)
1 SET ONGKOS SETTING/KIRIM DALAM KOTA DKI

MIXER AMPLIFIER BMB DA-2700 DSP SYSTEM

Special Features
* 185 Watt x 2 channel stereo amplifier.
* Two microphones can be used simultaneously.
* Low-impedance compatible power amplifier configuration that can drive two sets of speakers simultaneously.
* Easy to sing high perfomance digital echo.
* Digital Key controller Menu system
* Remote Controller (Control of MASTER VOL and selector MUSIC INPUT A or B, Mode, Menu/KEY CONTROLLER, Echo Vol Control , Repeat , Delay, Down and Up).

Specifications:
RMS Output : 185 Watt + 185 Watt
Mic Input Sensitivity : 9mV
External Devices Sensitivity : 250mV
Signal/Noise Ratio (with IHF A Filter) : 85dB
T.H.D. : 0.1%
Frequency Band : 10Hz - 40kHz
MIC Tone Adjustment :
..... LO : 80Hz + 15dB
..... MID : 1.2kHz + 8dB
..... HI : 10Hz + 15dB
Music Tone Adjustment :
..... LO : 80Hz + 9dB
..... MID : 1.2kHz + 6dB
..... HI : 10Hz + 9dB
ECHO Tone Adjusment :
..... LO : 80Hz + 15dB
..... HI : 10Hz + 15dB
Power source : AC 220V/50Hz
Electric Consumption : 480 Watt
Weight : 12 Kg
Dimension (mm) : 424 (W) x 368 (D) x 132 (H)
Warranty : 1 Year

POWER AMPLIFIER PROFESSIONAL AUDERPRO SA-300

Never too old to rock.
Still too cheap to hire a roadie.
If you want a high-performing, reliable power amp that cranks-and that's light enough so even your rockin' octogenarian granny can load it in-look no further than our SA Series. Coming in three models, the SA-300, SA400, SA500, SA700, SA900, SA1200. the SA Series power amplifiers give you amazing power, price and portability-for the real world. They feature Auderpro legendary Fast RecoveryTM circuitry for clean, undistorted sound with the ultimate in punch and clarity-even at clipping-‘cause we know amps often get pushed to the limit. Delivering more Watts per dollar than other amps in their price range 1500W, 2000W, 2200W, 3000W, 4200 dan 5000W respectively at 4 ohms bridged-the SA power amplifiers satisfy even the most demanding systems.
With their resonant switching power supplies, SA amps are super-efficient and ultra-lightweight, making them perfect for portable PA rigs, too-and Grannies on Tour. "Built-like-a-tank" construction and sophisticated protection circuitry ensure they will withstand the rigors of the road, and perform flawlessly during gigs, no matter what you throw at them. Combine the SA Series amplifiers with the Auderpro Precision Passive loudspeakers, and you've got optimum performance from a powerhouse system. Try 'em for yourself and you'll see, SA Series amps are simply louder, lighter and better than anything else in their class.

Specification:
Power output each Channel: 8 Ohm ........ 350 Watt
(1 kHz, 0.01% THD+N) 4 Ohm ........ 600 Watt
2 Ohm ....... 900 Watt
Bridged ..... 1500 Watt
Frequency Response (+0/-0,3dB, 1w/8 ohm: 20Hz-20Khz, -30dB@135kHz
Power Bandwidth (rated power at 4 ohm): 20Hz-20kHz, -9dB/+0.5dB
Max Peak Output Voltage: 105V
Max RMS Output Voltage (each chanel): 75V
THD+N (rated power, 4 ohm/1kHz): <0.01%
SMPTE IMD (rated power, 8 ohm, 60 Hz & 7kHz): <0.01%
Damping Factor (10-400Hz at 8 ohm): 550:1
Input CMRR (1kHz): >-60 dB
Standard Input Sensitivity (rated power at 8 ohm)#: 0.775V
Standard Voltage Gain (rated power @8 ohm)#: X61
Input Impedance (balanced/unbalance): >20K ohm/>10K ohm
Hum and Noise ("A" weighted, full power at 4 ohm): -105dB
Crosstalk ("A", weighted, full power at 4 ohm): >-60dB
Input Connectors (Per channel): Female XLR (pin 2+, configurablefor pin 3+) TRS (tip+)
Power Supply (factory configured): 220V, 50/60Hz
Cooling: Two rear panel variable speed DC fans, filters detatchable without tools
LED Indicators (per channel): Clip/Limit, Signal, Temp/DC, Active
Demensions (HxWxD): 133 x 483 x 400mm
Gross Weight: 20.88kg
Nes Weight: 18.61kg

SPEAKER PASSIVE AUDERPRO AP10-K, 10 INCH

Whether your looking for a voice monitor for your recently re-grouped band, your newly opened karaoke bar, or to communicate on a new level with your neighbor, the AP10-K has you covered. With its 250 to 550-Watt power rating, your sure to be heard whatever the situation.

A loudspeaker system is nothing more than the sum of its components and Auderpro engineers employ only cutting-edge technologies. They certainly didn't hold back with the AP10-K vocal monitor. Featuring a low diffraction IsoPower baffle, dual FreeFlow flared ports, and Straight-Line Signal Path, rest assured you'll have good, clear sound. Plus both the dual 3-inch tweeters and the 10-inch woofer are backed by high-temperature voice coils. And the tweeters have the added advantage of protection circuitry that keeps the tweeter intact under adverse conditions-such as when your aunt Martha belts out "Nothing Compares 2 U.

The AP10-K monitor is equipped with left and right high-frequency trim controls that control the tweeters in the left and right side panels of each AP10 speaker. The trim controls enable you to compensate for various room conditions and vocal styles: adjust the trim controls so that the vocals are loud enough to be intelligible without being so loud as to be harsh or distorted.

Amplification (Teaching, Assembly, Conference, Church, Parade, Lecture, Auction, Sales Promotion, Karaoke, Meeting, Music, and More...)

MODEL AP1O-K

FREQ RESP +/-3DB 37 - 20 kHz
SENSITIVITY 1 W @ 1 M 99dB
PEAK SPL 130 dB
SYSTEM IMPEDANCE 8 Ohm
POWER RATING PEAK 550 Watt
POWER RATING CONTINUOUS 250 Watt
Frequency Range (-10 dB) 39 Hz -20 kHz
SYSTEM TYPE 10", 3 - Way
LOW PASS (Hz) 2.5 kHz
HIGH PASS FILTER(Hz) -
FINISH MATERIAL Plywood Black
TRIPOLE STAND BOTTOM No
TRIPOLE STAND TOP No
Mounting Holes Yes
CONNECTORS INPUT Standart
-
CONNECTORS OUTPUT
WEIGHT NET (KG) 12 Kg/Pcs
WEIHT GROSS (KG) 13 Kg/Pcs
DEMENSIONS (MM)
HEIGTH 295 MM
WIDTH 510 MM
DEPTH 285 MM

MIC WIRELESS SHURE PGX/BETA58

Dengan Frequency UHF. terdiri 1 Receiver Dan 2 Mic pegang (2 chanel).
Durably constructed, with 12 compatible systems (multiple bands) and included carrying case, PGX is the perfect system for performers on the go who want worry-free performance, every time.
Shure PGX systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
SystemWorking Range 100m (300 ft.)
Note: actual range depends on RF signal absorption,reflection, and interference
Audio Frequency Response +/- 2 dB, Minimum: 45 Hz, Maximum: 15 kHz
(Overall system frequency depends on microphone element., Total Harmonic Distortion
Ref. +/- 33 kHz deviation, 1 kHz tone, 0.5%, typical, Dynamic Range
>100 dB A-weighted, Operating Temperature Range, -18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range, Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
PGX Handheld Transmitter
Audio Input Level, +2 dBV maximum at -10dB position, -8 dBV maximum at 0dB position
Gain Adjustment Range 10dB
RF Transmitter Output 30 mW maximum (dependent on applicable country regulations)
Weight 290 grams (10.2 oz.) without batteries
Housing Molded PC/ABS handle and battery cup
Power Requirements Battery Life >8 hours (alkaline)
PGX Receiver
Dimensions 40 mm H x 181 mm W x 104 mm D (1.6 x 7.125 x 4.1 in.)
Weight 327 g (11.5 oz.), Housing ABS
Audio Output Level (ref. +/- 33 kHz deviation with 1 kHz tone) XLR connector (into 600 Ω load): -19 dBV, 1/4 inch connector (into 3000 Ω load): -5 dBV
Output Impedance XLR connector: 200 Ω, 1/4 inch connector: 1kΩ XLR output
Impedance balanced, Pin 1: Ground (cable shield), Pin 2: Audio, Pin 3: No Audio
Sensitivity -105 dBm for 12 dB SINAD, typical, Image Rejection >70 dB, typical
Power Requirements, 12-18 Vdc at 150 mA, supplied by external power supply

SUBWOOFER ACTIVE AUDERPRO AP115SA, 15 INCH

In addition to acoustic performance the AP115SA features three full size deep-well handles, light weight, and balanced ergonomics. The new generation of AP Series products offers true portability and ease of handling. Five standard M10 rigging points and integrated pole mount socket increase the system's utility. The extremely rugged copolymer enclosure has been designed for main and 45° monitor orientation in the right hand configuration. A full screen-backed steel grille offers additional protection for both the woofer and compression driver components.

Features :
1.200 watt High-Performance Powered Subwoofer system.
Multiple handles with comfort rubber grips for easy transport.
100° H x 60° V asymmetrical wave guide for uniform audience coverage.
Line level and direct microphone input capability.
Selectable Pre-engineered EQ settings.
Unique Mix/Loop signal flow function for extended system application.
Applications :
Live sound reinforcement, speech and vocals, music playback in entertainment, A/V, and institutional venues - especially when ease of use and portability are important factors.
Amplification (Teaching, Assembly, Conference, Church, Parade, Lecture, Auction, Sales Promotion, Karaoke, Meeting, Music, and More...)

MODEL AP115SA

FREQ RESP +/-3DB 36 - 160Hz
SENSITIVITY 1 W @ 1 M 99dB
PEAK SPL 135 dB
SYSTEM IMPEDANCE 8 Ohm
POWER RATING PEAK 1.200 Watt
POWER RATING CONTINUOUS 600 Watt
Frequency Range (-10 dB) 37 Hz -140 Hz
SYSTEM TYPE 15" compact powered subwoofer
LOW PASS (Hz) 2.5 kHz
HIGH PASS FILTER(Hz) -
FINISH MATERIAL Plywood Black
TRIPOLE STAND BOTTOM No
TRIPOLE STAND TOP Yes
CONNECTORS INPUT RCA
Standart
CONNECTORS OUTPUT RCA
WEIGHT NET (KG) 33 Kg/Pcs
WEIHT GROSS (KG) 35 Kg/Pcs
DEMENSIONS (MM)
HEIGTH 550 MM
WIDTH 500 MM
DEPTH 500 MM
AC POWER OPTIONS AC100~120V / 220~240V, 50 / 60Hz
POWER ON INDICATOR LED

EQUALISER BEHRINGER FBQ-3102

Professional 31-band stereo Graphic Equalizer for both live and studio applications
Revolutionary FBQ Feedback Detection System instantly reveals critical frequencies and can also be used as Audio Analyzer
Dedicated mono subwoofer output with adjustable crossover frequency
Additional sweepable high and low cut filters for each channel remove unwanted frequencies e.g. floor rumble, tape hiss etc.
Highly accurate 12-digit LED input/output metering and input gain control for easy level setting
Ultra low-noise audio operational amplifiers offer outstanding sound performance
Relay-controlled hard-bypass with an auto-bypass function during power failure (failsafe relay)
Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
High-quality illuminated faders, detent potentiometers and illuminated switches for long-term reliability
Shielded toroidal power transformer for ultra low-noise performance
Extremely rugged all-metal chassis ensures long life even under the most demanding conditions
Conceived and designed by BEHRINGER Germany.
Fungsi: Untuk Band, Hall, Gereja, Dll.